1. It is recommended that the assembly is constructed by no less than 2 people. Never attempt to erect the assembly in high winds.

2. Note: To "VALIDATE" the guarantee, the item should be "TREATED ANNUALLY" with a quality wood preservative

3. When hanging the doors, place a block under door during the fixing process to provide additional support.

4. Use 5mm drill bit for all pre-drilling.

Before assembly we recommend that a base be prepared ensuring it is firm solid and level.
To ensure there is sufficient air circulation under the floor of the product (i.e. to prevent direct ground contact, which could cause the floor to rot). We recommend that the product is erected on pressure treated bearers / fence posts. (Not Supplied). Please refer to the chart below for the length and number of bearers required. Bearers should be 75mm x 75mm (3" X 3") in cross section.

Please Note
Timber is a natural material and will expand or shrink depending on the relative humidity surrounding or inside the shed. For example, during hot dry spells this shrinkage / may result in some warping or even splitting of the shiplap / feather edged cladding. However this will largely be reversed once cooler wetter weather returns.We recommend that you apply a water based preservative to your shed during hot dry periods to assist the timber in retaining its normal shape.

Floor Bearer Guide